When installing a Plate Heat Exchanger, pay attention to these key points. First, the installation location should be selected well, with sufficient space to facilitate subsequent inspection and maintenance. It should also be away from places with large vibrations and high temperatures to reduce equipment loss.
Before installation, carefully check whether the equipment is damaged, whether the plates are clean, and whether the gaskets are deformed or aged. During installation, follow the steps in the instructions. The order of the plates cannot be wrong, the clamping size must meet the standards, and the clamping force cannot be too large or too small, otherwise it will leak or affect the heat exchange effect.
When connecting pipes, ensure that the pipes are clean to prevent impurities from entering the equipment, and the interfaces must be firmly sealed to prevent leakage. After installation, first perform a water pressure test to check for leaks. After confirming that there are no problems, put it into use to ensure safe and stable operation of the Plate Heat Exchanger.
