What To Note When Installing Plate Heat Exchanger Sealing Strip

Sep 11, 2026 Leave a message

The plate heat exchanger sealing strip serves as the core sealing component of the equipment, and its installation quality directly determines whether leakage occurs in the heat exchanger. As a professional manufacturer, we have sorted out key points for on-site installation to help customers reduce equipment failures.

Before installation, clean the sealing grooves of the plates to remove old adhesive residues, oil stains and impurities, and check the grooves for scratches or deformation. Damaged grooves cause uneven compression on the sealing strip, which easily leads to leakage later. Embedded plate heat exchanger sealing strips are clipped directly into the grooves. For adhesive-type sealing strips, supporting special glue is required. Apply the glue thinly and evenly, and place the sealing strip after the glue reaches proper viscosity.

When placing the plate heat exchanger sealing strip, align it with the flow holes of the plates, ensuring the entire strip fully sits in the sealing groove without twisting or warping. After assembling the plate pack, tighten the bolts diagonally in multiple passes. Do not fully tighten a single bolt at one time to ensure uniform pressure. Control the tightening dimension according to value A specified on the equipment nameplate. Insufficient pressure causes water leakage, while excessive pressure will directly damage the sealing strip.

Keep the installation environment dry and dust-free to prevent dust from falling on the contact surfaces between the sealing strip and plates. A hydraulic pressure test is recommended after installation to confirm no leakage before commissioning.

Our company can provide technical guidance for plate heat exchanger sealing strip installation, and supply matching sealing strips for plates of various brands to reduce on-site installation risks.

 

Plate Heat Exchanger Sealing Strip
Plate Heat Exchanger Sealing Strip