1. Easy to clean After removing the clamping plate of the plate heat exchanger, the plate bundle can be loosened, the plates can be removed, and mechanical cleaning can be carried out.
2. Simply change the heating area or process combination Only adding (or reducing) plates is required to reach the required heat exchange area.
3. The quotation is not high Under the premise of using the same data, due to the limited information required for layout, the production cost must be lower than that of shell and tube heat exchangers.
4. Lightweight The thickness of the plates in plate heat exchangers is only 0.6~0.8mm, while the thickness of the heat exchange tubes in shell and tube heat exchangers is 2.0~2.5mm; The shell of a shell and tube heat exchanger is much heavier than the layout of a plate heat exchanger. Under the same heat transfer mission, plate heat exchangers require a smaller heat transfer area than shell and tube heat exchangers.
5. Small footprint The layout of plate heat exchangers is compact, with a heat exchange area per unit volume that is 2-5 times that of shell and tube heat exchangers. Unlike shell and tube heat exchangers, plate heat exchangers do not require reserved maintenance areas for extracting pipes. Therefore, when completing the same heat exchange mission, the footprint of plate heat exchangers is about 1/5~1/10 of that of shell and tube heat exchangers.
6. High heat transfer coefficient The layout of a shell and tube heat exchanger is excellent in terms of strength, but not ideal from a heat transfer perspective, as there are bypass paths between the baffle shell, baffle heat exchange tube, and tube shell when the fluid moves in the shell side. The fluid passing through these bypasses did not fully participate in heat exchange. Plate heat exchangers, on the other hand, do not have a bypass, and the ripples on the plates can cause turbulence in the fluid at lower flow rates. So plate heat exchangers have a higher heat transfer coefficient, usually 3-5 times that of shell and tube heat exchangers.
What Are The Advantages Of Plate Heat Exchangers?
Jul 02, 2024
Leave a message

